Decorating your garden using improvised means is not only easy, but also enjoyable. After all, such an activity can bring the whole family together, and everyone will find something they like and can handle. Today we will tell you how to make a swan from a tire with your own hands, and look at several forms of these figures and ways to use them in the garden and flowerbed.

Materials, tools, basic concepts

You've probably seen these figurines in the form of swans near private houses in rural areas or on summer cottages. And perhaps they wanted to do something similar near their home. So why not, if you have a pair of old, outdated tires lying around in your barn? Even if they are not there, you can find several at any auto repair shop.

I won’t say that making a tire swan is a very simple task. The rubber is quite hard and elastic, so you will have to make some effort, as well as be careful and careful.

But the activity will not take you much time, only about an hour per swan. And you will see that it was worth it!

• So, what we need in our work:
• old car tire;
• Bulgarian;
• jigsaw;
• wire for fixing the shape;

paint, white or black - for the swan, red - for the beak.

Old tires are an excellent material for using your imagination

In some cases we will use additional materials and tools. But we will dwell on them during the description.

Please note: try to immediately decide what you will use to cut the tire - a grinder or a jigsaw. Using a grinder will help you get the job done faster, but the smoke and smell of burnt rubber can be very harmful.

Where can such swans be used? You can install the figurine anywhere in your garden. The swan will simply serve as a toy and decoration; it can be used as a flower bed and even the basis for a small country fountain.

Now let's look at several options separately.

This is perhaps the simplest option, and at the same time functional. In order to make a swan flowerbed, use a simple diagram, applying it to the tire in advance.

Diagram of a swan flowerbed made from a tire

1. Using a jigsaw, cut along the black lines along the head and neck. The red lines in the diagram indicate the tail, the blue lines the wing plumage. Make cuts along them.
2. Now comes the hardest part: you need to turn the tire inside out. Do this carefully and turn it out carefully so that the tire is not damaged.
3. The main work is done, only little things remain. Make a beak (from plastic, plywood, or a piece of another tire) and paint it red.
4. Place the two halves of the head together. To do this, you need to bend the rigid cord, insert the beak and secure the entire structure with self-tapping screws. They need to be screwed in place of the eyes.
5. Raise your head and press it slightly into the wheel. Secure the resulting fold in several places with self-tapping screws. Tighten as tightly as possible to keep the head in place better.
6. All that remains is to paint your structure white or black, depending on your imagination and desire. The screws in place of the eyes can be painted over with black paint, or better yet, covered with circles of electrical tape.

This flowerbed in the shape of a swan can be made from a tire

Now install your mini-flowerbed in the planned location, fill it to the top with prepared soil and plant flowers inside. These can be pansies, marigolds, matiola, begonias or any other low plants.

Decoration figurine

This swan is of aesthetic value only. Making it is no more difficult than the previous one, but you will have to work a little on the shape of the bends. But such a figurine will decorate the site no worse than an antique statue!

When choosing a tire for a swan, make sure that it does not have a metal cord - it will be much easier to cut. In order to subsequently fix the neck, take aluminum wire or an elastic iron bar.

Arm yourself with a sharp knife and a jigsaw for cutting very dense areas. To attach the iron bar to the tire you will need a drill.

Scheme of the garden swan

1. Please note: for processing it is better to take “bald” tires of domestic production. They are softer and easier to cut.
2. Cut the tire along the marked lines. If you use a knife, soak it in soapy water to make the process easier.
3. Now you need to turn the tire inside out. You will need a helper to do this, but you can do it yourself by stepping on the outer rim of the tire. The frame of the future swan is almost ready.
4. Secure the neck: drill paired holes in the tire and attach the neck with a thin wire to an iron bar on the outside. Once you paint the swan, the fastenings will be almost invisible.

Paint the swan's body with white paint and its beak with red

A flexible iron plate will help give the neck the desired bend shape. The plate should be slightly longer and narrower than the neck itself. Make holes in it with a drill and secure it into the desired shape.

You can make another version of the swan using this pattern. Just don't turn the tire inside out, this way the shape will be slightly different and the fenders will drop more towards the ground.

Now you know how to decorate your site with beautiful homemade swans. And you can make them from an old, worn-out tire. Perhaps you know a few more schemes and methods. Please share your experience with us in the comments. Good luck!

For most people, a summer cottage or garden plot is not just a vegetable garden and beds, it is also a favorite vacation spot. Think for yourself: you can have a good rest in nature and completely relax from the bustle of the city. In order to somehow decorate and ennoble their vacation spot, people make a variety of beautiful DIY crafts for their garden.

Crafts for the garden, how to create a border for a flower bed or bed using plastic bottles

Creating crafts with your own hands will not only allow you to realize your creative abilities, but will also attract children to work. Naturally, you can buy ready-made decorations, but how nice it will be to implement your own ideas for the garden with your own hands!

An excellent solution, for example, would be to create a border for a flower bed or bed from seemingly useless plastic bottles. For this simple task, both colored and unpainted bottles will suit you.

Did you know? You can give any shape to your border.

To install a fence, you need:

Important! Arrange the bottles as closely as possible, leaving no gaps.

As you can see, the work is not at all difficult, but you will have a stable and original fence for your flowerbed or garden bed.

A plastic bee is an excellent decoration option for a summer house. To create this decor you will need:

Important! Use acrylic paints - other types of paint will take a long time to dry and will adhere worse to the surface of the bottle.

By following simple instructions, you will get excellent DIY garden crafts:

1. Cut out bee wings from a plastic cup.
2. Insert the resulting wings into the small holes made in advance in the bottle, attaching them with electrical tape.
3. Paint the bee's body: paint the bottle black, and after it has completely dried, paint yellow stripes.
4. Now start drawing the face of your bee. On a bottle cap pre-painted black, draw eyes with white paint and a mouth with red paint.
5. If you wish, draw an outline on the wings.

If you have empty glass bottles, don't rush to throw them away. This bottle will make an excellent lamp, especially if it has an unusual shape. To do this, you just need a little time, accuracy and a few simple materials:

• bottle (preferably dark);
• protective glasses;
• drill;
• small New Year's garland;
• glass cutter and insulating tape.

Having prepared all the materials, you can start working:

1. Slowly, carefully drill a small hole in the side or bottom of the bottle.
2. Thread the garland through the hole (only the fork should remain outside the bottle).
3. Place the bottle in the desired location and connect to the network.

Important! The neck of the bottle should not be covered. While the garland is operating, its lamps will glow, and the hole in the neck will allow them to cool a little.

How to use old tires in the garden

Crafts made from tires and plastic bottles can greatly transform an ordinary dacha. If your tires have already served you and you are thinking about throwing them away, stop immediately. From old, seemingly unnecessary tires, you can make many beautiful things, such as a flowerbed, swan, stand or furniture. In order to build a beautiful flower bed, take a tire and paint it in some bright, pleasing color. Cut off one of the sides. You can make smooth edges, a patterned line, teeth or fringe. Place the resulting flowerbed in the designated area, cover it with soil and fertilizers and plant flowers. As you can see, you can make various crafts for your garden using tires.

How to Upgrade a Wooden Pallet and Store Garden Tools

Wooden pallets make excellent boxes for gardening tools.

Did you know? To make a tool box you only need one pallet.

So, let's get started:

How to make a swan from bottles

When choosing which DIY garden crafts you want to make, be sure to pay attention to the swan flower bed made from bottles. The swan is a symbol of beauty, grace, elegance.

How to draw a swan head

Swans are very beautiful, graceful, noble birds. Their appearance immediately evokes admiration. It is no wonder that people often want to draw a beautiful lonely swan or, even better, a swan couple with beautifully curved double necks - beak-to-beak. Well, you've seen stories like this more than once.

Okay, huh? I already wrote an article about this and decided that since I drew several pictures from photographs, now I’m already in the subject. But, as it happened, questions arose - what exactly does his head look like?

So, let's draw the swan's head.

I'll start with the diagram. I’ll draw it with a pencil. The neck is long, thin, and the swan can bend it beautifully, or it can just hold it straight and that’s it.

I don’t like geometric comparisons, but sometimes I have to use, in general, the swan’s head is not round, not oval, but rather ovoid. The eye is small, oval and located approximately in the center (if you look in profile, of course). The beak is large, almost the same length as the head. Moreover, the upper half of the beak predominates; the lower (jaw) underneath it can only be guessed. The beak is reddish or orange.

And now it’s time for us to face the truth: above the beak there is a certain black teardrop-shaped growth. God knows why it’s there, the fact is that it’s quite big and looks like it’s leaking. When I saw this formation in the first photograph of a swan, I was surprised and thought: maybe it was an accident. But in other photographs on Yandex pictures, almost all swans have such a swelling from the forehead to the base of the beak. Moreover, the surface is somehow grainy and uneven. Below this influx, the base of the beak is also black - a triangle up to the eye, and the eye is somehow lost because of this coloring. There is also a small one - well, I knew about it before.

The swan is a beautiful bird that graces any pond. But not everyone can afford to purchase and care for real swans. But you can make your own artificial swan from scrap items.

This swan can be used to decorate a garden or playground.

You can also make a swan, into which you can pour soil and plant flowers. One way or another, both you and the children will receive aesthetic pleasure from such a craft.

How to make a swan from a tire





1. Prepare old tires, preferably “bald” ones, and mark the cut lines with chalk.

2. Start cutting along the lines, then bend them to create wings.









3. In order for the head and neck with the chest of the swans to keep their shape, it is advisable to use a stainless steel plate, which must be bent so as to give the shape of the head, neck and chest.









4. After this, you need to screw the plate to the rubber using inconspicuous small screws.

5. Also cut out the eyes from rubber and, using the same screws, attach them to the swan's head. And after that, cover our swans twice with white water-based paint, only make their noses red.









6. All that remains is to fix the swan in the halves of the lids, pre-painted in the color of the water (blue, light blue, green), and your swan floats in the pond.

How to make a swan from a wheel









This is another option for making a swan with your own hands from a tire. To make it, prepare, as always, an old wheel, chalk, a sharp knife (just in case, also prepare a hacksaw or jigsaw) and paint.

1. Using chalk, draw on both sides of the wheel all the details of the future swan, i.e. head, tail, wings, neck, beak.

2. Start with a sharp knife to cut out all the parts along the contour lines.

* If some parts do not lend themselves, you can use a hacksaw or jigsaw.

3. Bend the wings and neck. If the neck is difficult to bend, plywood will help you, with which you can fix it.

4. All that remains is to paint the swan.

How to make a swan (video)

Watch the video tutorial on how to make a swan from a tire if you want to understand some of the details. This tutorial used a jigsaw.






How to make a swan from a tire









1. The first thing to do is use chalk to mark the areas on the tire that you will be cutting. The images show these lines.

* If your knife is sharp enough, then everything will take you no more than 20 minutes.

* It is worth noting that it is very difficult to cut thick rubber, so use a sharp knife that is periodically moistened with soapy water.









2. The hardest part of the tire must be knocked out using a chisel or grinder. This part will serve as the head and tail of your “swan”. Everything will take no more than five minutes.









3. It's time to turn the tire out.

4. It is advisable to properly treat the head and tail of the rubber swan, since uneven edges can cause scratches.

5. All that remains is to paint the swan - you can use white or a very unusual and beautiful bronze color.

How to make a swan from modules







Crafts from plastic bottles. Swan.









There is no need to get rid of plastic bottles if they have already been used for their intended purpose. There are many crafts that you can make from them.

For example, there are several ways to make a beautiful swan for the garden. Moreover, such a swan will not only decorate your garden, but will also bring benefits.

You will need:

Plastic bottle 5 l

Milk bottles 300 g

Hard Wire Hose

Wire

Scissors

1. Using a marker, mark the lines on the 5-liter plastic bottle that you will follow to cut out.









2. First cut off the top of the bottle and leave the neck, which is needed to secure the swan's neck in the hole.









3. For the skeleton of the swan's neck, use a hose with stiff wire. Insert it into the bottle through the neck and secure the neck to the lower part of the body with wire. You have a swan frame ready.











4. Preparing feathers for the bird. Take a white plastic bottle (usually the kind used for milk) and cut off the neck and bottom.









Start cutting the “feathers” - their width and shape depend only on your imagination.









It is advisable to cut the edges of the “feathers” with fringe to achieve an even more realistic effect.









Heat each feather of the candles from the outside.









5. Start collecting two feathers and fixing them with wire.









6. For the bird's neck, use bottles without a bottom. Depending on their number, you can choose the length of the neck. In this example, 16 300g bottles were used.

The part near the beak was made from the top of a bottle without a neck.

7. Where the beak is located, the hose ends and to attach the structure you need to make holes on both sides in the bottle and in the hose. Next, secure it with wire.









8. Close the lid and take a chemical cap to prepare the base of the beak. This cap needs to be cut in half, similar to the letter M.

9. Take another such lid and insert the beak into it - there is a groove inside so that everything comes out exactly.

10. Glue the first and second covers.









11. Paint the beak and place your favorite plants in the flowerbed.

How to make a swan from plastic bottles









This is not just a swan - this is a swan princess who will decorate any garden. It’s worth noting right away that assembling this swan is a labor-intensive and rather lengthy process, so be patient and let’s get started.

You can call on one or more people to help you create the craft to speed up the process.

Prepare:

Plastic bottles

Thick copper wire (if you have thin wire, fold it in half to prevent it from breaking)

Stationery knife

Pliers

White and yellow paint (can be regular or aerosol)

1. You should start making a swan from plastic bottles from the head and neck. Then these parts of the swan become the body. First, cut the plastic bottle to fit the head.









2. Trim the neck parts of the craft. It is advisable to make 18 similar blanks in advance to create a neck.









3. Use an awl to pierce each piece.









4. Prepare the wire and thread it through the holes of the blanks, gradually stringing them to form a neck (you need to thread it from the bottom to the head). Attach your wire to the tip of the beak.









5. When you have assembled all the pieces on the wire (1 piece for the head and 18 for the neck), start assembling the body. Prepare 4 bottles and cut them as shown in the image:









6. Using the same pattern, start stringing the pieces onto the wire. Insert a whole bottle into the outer blank.

7. Secure the other end of the wire.

8. To make a swan's neck stronger, you must first give it the desired shape. To do this, simply adjust the depth of entry of one workpiece into another.

Use wire to secure all the swan parts together.

Start making holes in the bottles that make up the neck so that the wire runs parallel to the floor (you need to do this on the floor and preferably start from the tail).









You should end up with a kind of “zigzag” of wire - it should “enter” and “come out” of the neck where the two pieces fit into each other.

9. Place the uppermost end of the wire where the crown is attached.









10. Cut out a crown for the swan princess from a plastic bottle.

11. Take the crown and place it on your swan's head. To do this, you need to make 2 holes in the neck of the crown and thread the wire from the neck into them. Next, you need to wrap the wire around the neck and use pliers to clamp it.









12. It's time to assemble the body. The first thing you need to do is the belly, which has two “sticks” and each of them is made by connecting 4 large blanks (point 4) and 1 whole plastic bottle.









You need to "sew" these "sticks" using wire. This should be done in a zigzag, parallel to the floor. It is necessary to create a rigid foundation for the swan.

13. We continue to make the body, namely its next row. The middle will be occupied by the swan’s neck, which means you will need the help of another person - while you “stitch” the second row, your assistant needs to keep the neck constantly in an upright position.









Still, first you need to prepare 2 “sticks”, each assembled from five large blanks and one whole bottle (for the tail). After this, all 3 blanks need to be fastened with wire, placing the neck between two “sticks”.









14. Pay close attention to securing the neck curve at the front.









15. We are preparing the third row of the body. Start assembling another “stick” - use 4 large blanks and 1 whole bottle for the tail.











Push your pieces tightly into each other, and pour water into the untouched bottle to balance the neck and tail of the craft.

It is worth noting that the stick does not need to be stitched separately. All you need to do is place it on top of the neck from the side of the body and attach it with wire to the side “sticks” of the 2nd row of the swan’s body.

16. It's time to make wings for your swan. To do this, you need to collect 2 “sticks”, each of which contains 4 large blanks and one whole bottle. Bend the pieces as shown in the image and fasten them again with a zigzag using wire.









To make the base of the wings you need to make 2 short “sticks”, each of which consists of one whole bottle and one large blank.

17. Begin attaching the bases of the wings to the swan's body. The image shows a top view with the bird's tail on the right side. To attach everything, use a wire that needs to be threaded through the bases of the wings and secured to the already installed swan parts.







22. It's time to paint. To do this, you can use either aerosol paint or regular paint (but it will take more time). If you decide to use an aerosol, then you need to paint outdoors, not indoors.









How to make a swan with your own hands









In this master class you will learn how to make a beautiful flower bed from the swan you made earlier.

You will need:

Plastic bottles

Plastic bags (preferably thick ones, for example, from washing powder or dry pet food)

Stapler

Saw or knife

Pliers

Scissors

Soil (preferably special ready-made soil from bags).

1. First you need to firmly secure the swan in a place specially prepared for it. To do this, you need to dig a shallow hole.









To keep the swan level, you need to hammer 2 wooden pegs on both sides of it, in the upper part of which you need to make small cuts.

Pull a wire through the notches, which will help the craft remain level.









The wire is threaded, tightened and secured under the curved parts of the wings.

2. Prepare one thick bag and cut it to form a large rectangle.









Cover the inner space between the wings with this polyethylene “blanket”.

*The edges of your bag should extend slightly above the wings.

3. You have a kind of pot into which you need to pour soil for flowers.









4. Use a stapler to staple the front and back of the flower bed together.









*If desired, you can cut off the excess edges of the polyethylene.









5. Now all that remains is to plant something in the finished flowerbed.

How to make a swan out of paper






How to make an origami swan

Conceived and designed by Habitat Horticulture, the Green Table allows city dwellers to have a small flowerbed in their home.

Extraordinary jewelry
But not only Western jewelers and jewelry houses are able to create jewelry worthy of the Guinness Book of Records. Ukrainian jewelers have been included in the list of world achievements as the creators of jewelry with the largest number of diamonds. The ring, called "The Swan Princess", is made of 18-karat white gold and is decorated with a record number of diamonds - 2,525 pieces. Currently, the Swan Princess ring is located in Kyiv and according to published reports, the price of this masterpiece is 1.3 million US dollars.

Black Swan - married woman -
Kissed my palms...
We fell shamelessly into the pool
And swayed on the waves of love.

And then, like the birds of heaven,
The two of us flew into the clouds!..
Oh, what a pity - I was too late to be born.
Oh, what a pity that love is short!

Black Swan - married woman -
Flew across the nine seas.
You're still married to me
My very first love!

You are far away, but you are no closer
I pray to God for your love.
I hate you with half my heart
And I love you madly with half my heart...

Homemade hanging flower beds from old footballs and basketballs. Flowerbeds fit perfectly into the overall atmosphere, for example, at your dacha. Can be hung in a gazebo, on a facade, fence, etc.

Source: http://www.freeseller.ru/izhlama/hlam/3287-podvesnaya-klumba-iz-myachey.html
© Workshop of useful homemade products.

flower bed master class photo I suggest you look at an original idea for decorating a summer cottage or a country house - photo master class on making a hanging flower bed with your own hands.

Source materials: ready-made flowerbeds made of metal rods, moss, wood shavings, and flower seedlings.

Turn an old chair into a flower vase
In order to make an amazing chair transformation you will need paints, plant fabric and soil.

If the chair has a soft seat, you will need to remove the seat, upholstery, springs and all nails. Your white kitchen chairs can easily replace old chairs that have lost their appearance, so you can create this amazing flower bed without any regret. If you use a chair with a simple hard seat for the flower vase, it will be even easier.
You will have to very carefully cover up all the holes and cracks, and remove burrs and failures. Then you will need to paint your chair, because you need it to look like new, which color of paint is best to choose, of course, you decide, the main thing is that it fits well and sparkled.

You can put rubber on the bottom so that it is completely sealed, or you can use an option with wire mesh and fabric. Fill with soil and plant beautiful, bright flowers, preferably with a slight difference in height - the tallest ones are closer to the back