DIY night light: a master class on how to make it and the best ideas on how to design it quickly and beautifully. DIY night light: visual aid and instructions on how to make a beautiful lamp Homemade night lights
Night light is a lighting device used directly functional purpose, and as an additional decorative element. It is difficult to overestimate the role of these lamps in shaping the design of a bedroom or lounge. In stores and electrical markets you can find a variety of models, but they will all resemble each other in certain aspects. If you want to show your imagination and originality, then create a night light from LEDs with your own hands.
You can make a lighting fixture to decorate your bedroom from scrap materials, including CDs, cardboard or plain paper, nylon threads, plywood sheets, glass or plastic bottles etc. There are so many options that it’s impossible to fit everything into one article. The emphasis is on LED lamps, so the devices are less energy-intensive and as safe as possible.
This device is characterized by compactness and simplicity of design, which is associated with the use of simple electrical diagram. Any person who has set such a goal can create it independently. When creating a design, focus on the interior of the room in which the device will be installed.
For the production of lighting fixtures, old electrical parts obtained from failed lamps and even unrelated equipment, including fumigators, mobile phone chargers, electrical plugs, etc. can be used. To decorate and create a unique shape, cans, plastic or glass glasses, children's toys and even syringes (without a needle, of course) can be used.
If you are confident in your abilities and want to bring an unusual idea to life, you may need to purchase more expensive items and parts.
When assembling the lamp, pay great attention to electrical and fire safety. If low-power LED bulbs are used, the possibility of a short circuit cannot be ruled out. The consequences can be especially unpleasant when using lamps in children's rooms. Try to exclude even the most unimaginable and unlikely outcomes.
Avoid using classic incandescent or halogen lamps as they become excessively hot during operation. LEDs are the ideal solution. In addition, they reduce the amount of electricity consumed by 7-8 times and will be economical even with the lights on for the whole night.
Of course you can choose low-power lamp incandescent Using an illustrative example, let’s calculate the amount of energy consumed per year for a 25 W incandescent lamp. Let's assume that the lamp works for 5-6 hours every day. In this case, in 360-365 days (exactly a year) 55-60 kW will accumulate. The indicator is insignificant, but you can save money. With identical power, diode lamps will be much brighter, so if the luminous flux from a 25 W incandescent lamp is enough, then buy a 5 W LED (or less).
In night light circuits made from fumigators, chargers with voltage reduction through resistors, wide- and narrow-directional LEDs can be used. Choose products with maximum brightness.
Narrow-beam devices have a limited light beam, aimed only in one direction. This device will look good together with the main source of lighting (for example, a chandelier), but you must connect the chandelier and the night light via a double switch so that you can activate the devices separately.
Varieties of homemade night lights
Below we will consider the most common options for making night lamps with your own hands.
Night light made of transistors in the shape of the moon
To build a lamp you will need an LED strip and two transistors through which the first element is connected. The first transistor will automatically regulate the device due to the incident light, after which it will trigger the second transistor, which directly turns on/off the flexible board.
By adding a resistor to the circuit, you can adjust the sensitivity and threshold at which the transistors operate and the backlight lights up.
As for the design of the night light, before starting work, find a sheet of plywood and cut a circle out of it. The base should resemble the letter "O". Use a printer and print out an image of the Moon. When everything is done, take a drill in your hands and drill two holes. One - in the upper part, will serve as a fastening of the night light to the wall, the other, in the lower part - will be used for pulling the cable.
Next, glue the base of the lamp to the circle of plywood using special PVA wood glue. You will first have to sand the surfaces, making them perfectly flat and smooth. Be sure to degrease, otherwise adhesion will be weak. The design as a whole is as simple and understandable as possible.
After a few hours (until it dries completely), measure a length of light diode strip, placing the board along the edge of the letter “O”. Cut off the excess portion at the location indicated by the manufacturers (look for the picture of “scissors”).
- Solder the wires and LED strip.
- Glue the printed image of the Moon onto a circle of plywood. Take your time and smooth out any wrinkles. The edges need to be folded, forming a “skirt”, which will have to be cut off later.
- Wait for the glue to dry.
- Drill a hole to install the photocell. Choose a place so that the element matches the glued image.
- Remove the protective layer located on the back of the flexible board, then stick the LED strip around the perimeter of the oval. Pass the wire through the pre-made hole in the bottom (read above).
- This hole must be used to pass the power cable coming from the source (distribution panel, outlet, etc.).
- Use a regular nylon tie to tie the wires together.
- The transistor connection diagram can be found on the Internet - it is as simple as possible. Unfortunately, you can’t do without the basics of electrical engineering here.
- Solder the wires to the photocell and use heat shrink tubing to improve the insulation.
- Solder the wires from the power cable to the working board.
- It is recommended to attach the board to the lamp using Velcro or other quick-release elements.
- Place the photo sensor in the pre-made hole and secure it with glue.
Hang the finished device in the room where you plan to use it and enjoy the result. Using pulse block power supply, you will protect yourself and avoid unnecessary expenses: when the night light is turned off, but the power supply is plugged in, the latter will consume virtually no electricity.
LED night light from an old electrical plug
Another simple night light that you can make with your own hands is made from a regular electrical plug. Of course, unlike the “porridge from an axe”, you won’t be able to create a lamp from one plug, so you will need LEDs, two resistor elements, two capacitors, a zener diode and polyvinyl chloride tubes. The latter will be necessary to insulate the wires and prevent short circuits.
Inspect the plug and remove the grounding pins. Remove the clamp, then grind down the rim on the LED using a file.
The connection diagram for electrical elements is similar to the use of a fumigator (a device that is plugged into an outlet with a “pill” to repel mosquitoes and flies). The device is disassembled, the heating element is removed, and an LED is mounted in the free space. The voltage from the mains supply is supplied through the capacitor. Excess voltage acts on the rectifier bridge, and a resistance and a capacitor are activated at the output, smoothing out the ripple. The mains voltage should be about 400 V.
IN in this case Instead of a fumigator, an electric plug is used. Ready scheme placed inside the lampshade, the shape of which can be arbitrary. The lampshade is created independently or purchased in a store (usually plastic or glass products). You can cut out the frame of the night light from wood, covering the top with a protective layer of special varnish and impregnation that prevents the appearance of fungus or mold and rotting.
In this case we are talking about decorating the device. As electronic circuit You can choose any of the options described above. Plywood is natural and environmentally friendly pure material, easy to process. Using a manual or electric jigsaw, you can easily give it the desired shape.
In the process of making such a lamp, you may need a jigsaw, drill, glue, nails, hammer and pencil or other stationery item for marking.
The finished products are mounted on the wall, and the luminous elements are located between the wall and a sheet of plywood of the selected shape. Cut out an image of a cat from plywood and hang the finished lamp on the wall. It looks simply gorgeous and is much more original than the lighting fixtures sold in stores.
To create a “home zoo” from night lights, you need a template of an animal, stars and other objects, which will have to be printed on a large sheet of paper. Cut it along the contour, acting as carefully as possible. It is advisable to print on an A3 sheet, but an A4 version may work if you are making a small lamp.
Attach the drawing to the plywood and trace it along the outline with a pencil or marker. Next, you need to cut out the resulting shape and attach an LED strip to the back. Find the conditional center of the cut out figure where you need to attach the board. This will create a night light with an even glow in all directions. For fastening, an adhesive layer hidden under the protective film on the back of the LED strip will be sufficient.
Now you need to think about attaching the lamp to the wall. To get best result and to avoid a situation where the light practically does not extend beyond the boundaries of the plywood figure, the night light should not lie close to the wall. Glue a wooden block to it or screw it with self-tapping screws and build a fastening element on it (for example, an “eye” by which the device can be hung on a dowel sticking out of the wall).
Please note that you can cut out several identical figures, make night lights out of them, but place them at different angles.
This option involves cutting out a metric from plywood with the name of a child, spouse, etc. If you want a more original lighting fixture, try creating a multi-level lamp from plywood by cutting out various shapes and placing them on top of each other due to the difference in dimensions. If the size of such a device is large, then instead of an LED strip it would be rational to use a LED lamp.
Do not use incandescent or halogen lamps for plywood, wood and paper night lights. They have excessively high heating temperatures, which increases the level of fire hazard.
Homemade product from a faulty fumigator
This method was partially described above, but let's look at it in more detail. To make such a night light you will need:
- fumigator - so as not to feel sorry for it, take the device that is out of order;
- two capacitors;
- resistor;
- diodes for rectifier bridge;
- two white LEDs (although the glow and color temperature are selected individually, in accordance with the preferences of each consumer).
The sequence of actions is as simple as possible: the fumigator body is disassembled, the heating element is removed and LEDs are mounted in its place.
The operating principle of the resulting lamp is as follows: the mains voltage is supplied to the capacitor. The reactance of the device interacts with the excess voltage and goes to a rectifier bridge consisting of KD209 diodes. The output voltage from the rectifier bridge activates the load resistor, while the second capacitor is responsible for smoothing out the ripple.
The resulting DC voltage powers the white diodes through a capacitor. The voltage on the first capacitor must be at least 400 V. This is important to consider when building a rectifier bridge from diodes. The total number of LEDs varies depending on the desired end result. Regardless of the choice, the connection diagram remains the same.
Phone charger as a power supply
Almost every person has an old charger lying around their house. mobile phone. Perhaps this power supply is faulty or is simply lying around unnecessarily.
Inspect the charger and determine its power. Let's assume that this parameter is 6 W. Using Ohm's law, calculate the resistance of the required current limiting resistors depending on the LEDs used. The maximum current passing through the LED should not exceed 20 mA.
If the voltage of the selected diodes is the same, then they can be connected through one resistor. The light will still be inhomogeneous, but such differences are insignificant and invisible to the human eye. After completing the assembly, fix the parts with superglue and install them in the center of the ceiling, next to the chandelier.
During the day, the lighting device will be invisible, and at night it will delight you with dim light, sufficient to ensure that the room is not as dark and gloomy as children imagine it to be. The power of the finished lamp will be 7 W, so electricity consumption will be minimal.
Thus, for a homemade night light, you can take the body of any electrical device that has failed. This is one of the main advantages of creating lamps with your own hands. Larger lighting fixtures are made from powerful LED light bulbs or whole pieces of flexible tape.
The choice of materials, step-by-step process and power of LED devices depends on the desired end result. The main difficulties are associated with soldering the electronic circuit, and decorating the device, for example, using plywood, is not difficult.
A huge number of master classes encourage us to make souvenirs, small gifts and interior decorations with our own hands. Such little things add coziness to the interior and certainly please the eye. You can always proudly tell your admiring guests that this is the subject of your labor, a unique work.
In this article you will find a description of several ways to make a night light with your own hands. Why night light? Despite the fact that this item can be bought in a store, it’s always nice to show your imagination and make it yourself. Then the night light will not only give light, but also warm you with its warmth thanks to the fact that it is made with love and tenderness.
Night light “Starry Sky”
To make a night light with your own hands, you only need an assistant
material that can be found in every apartment. One of the advantages of this lamp is that it does not require a network connection. You will be able to enjoy starry sky without leaving home thanks to a small flashlight powered by little finger batteries.
So, you will need: glass jar with a screw cap, thick foil, an awl, scissors, a tray (or any hard surface that is not afraid of scratches), a small flashlight.
Step 1. Take a sheet of foil and draw a diagram of the starry sky on it. If you want an exact copy, you will have to work hard. You can do this schematically, from memory.
Step 2. Place the sheet with the drawn diagram on a hard surface and use an awl to make holes. These will be our stars.
Step 3. Cut off all excess from the foil. The height of the sheet should be equal to the height of the jar. Carefully roll the sheet into a tube and insert it into the prepared jar.
Step 4. Place a flashlight on the bottom of the jar and turn it on.
All that remains is to wait for the night and enjoy the picture of the starry sky.
Lace night light
Making a night light for your bedroom with your own hands is as easy as shelling pears. It will be beautiful
lamp using lace.
To make it you will need: some lace fabric, a clean jar, scissors and thread, a battery-powered flashlight.
Step 1. Take a clean and dry jar, wrap it with lace, it should not overlap or protrude beyond the edges of the jar. Cut off any excess.
Step 2. Sew the edges of the lace to create a sleeve. This can be done either using a machine or manually.
Step 3. Place the resulting sleeve onto the jar.
Step 4: Place the flashlight in the jar and screw on the lid.
You can make such a night light with your own hands in a matter of minutes, and its light will bring romance to your interior.
Night light with butterflies
Another option for a romantic dinner is a night light with butterflies.
To make it you will need: wire (about 50 cm), 2 sheets of white paper, a jar, an ordinary flat candle, butterfly stencils.
Step 1. Cut out several butterflies using stencils (6-7 pieces) from white paper. We roll the second sheet into a tube and decorate the edges beautifully (by curly cutting).
Step 2. Glue the butterflies onto the resulting tube in random order, leaving 2 pieces for the next step.
Step 3. Take the wire, wrap it around the can once, and then bend it so that you get a semicircle above the can itself. Using a thread, we tie the remaining 2 butterflies onto the resulting bend.
Step 4. Place a jar inside our tube with butterflies glued on.
Step 5. Place a lit candle in the jar and enjoy the magnificent picture.
Night light for a child
Making a children's night light with your own hands is also quite simple, the main thing is to show your imagination. For those who want to please their baby, the following is a homemade option.
You will need: a round lampshade or flashlight (or better yet, a New Year's garland), a lot of tulle or tulle, glue and patience.
Step 1. Take tulle and cut a lot of circles.
Step 2. Take the lampshade, it should be clean and dry. Next, take one circle of tulle at a time and fold it in the shape of a rose (take it by the middle, lifting the edges up - your rose is ready). Using glue, we fix the tulle on the lampshade, gluing it only with the middle. This way you will get a fluffy ball.
We hide a garland or a flashlight inside the lampshade and show the child beautiful magic. The baby will be delighted and will happily fall asleep in the light of such a night light.
It's no secret that many people: adults, children, do not like or are simply afraid to sleep in the dark. Small table or wall lamps called nightlights often help to get rid of this feeling.
A night light is not just a source of artificial lighting. He is important element decorating the bedroom.
He performs his main role in the evenings and at night. Hence its name. They hardly use it during the day.
In the evenings, when the sleep period begins and the large ceiling chandeliers are turned off, the night light becomes the dominant element.
The easiest way to buy a night lighting device is in a store. But if someone wants to ask how to make a night light with their own hands, it turns out that it is a very exciting activity.
Using a lot of different materials at hand, you can create an excellent, exclusive, stylish night light. Its colors and external shapes will depend entirely on the imagination of the home craftsman.
What is the use of a night light
The night light is an excellent soothing remedy for “night panties”, as stated above.
But a small light bulb, usually located near the bed, has other useful functions:
- Creating a pleasant environment before bed.
- Saving electricity, since the light bulb in a small night lamp consumes little electricity. Its power is several times less than that of a large ceiling chandelier.
- Acting as a room interior decoration and so on.
Night light locations
Before bringing to life the idea of creating a night light, it is worth deciding on the method of its location. As you already know, such a lamp is placed not far from the bed.
That is, it can be a beautiful battery-powered night light that is mounted on the wall, or a lamp standing on the night table, or on the floor.
Examples of night lamps
You can get ideas for creating a night light on the Internet. Although this is usually the first thing that comes to mind. To obtain information, you can use colorful manuals and a variety of literature intended for home handicrafts.
Independent work is always interesting, since creating a similar design from a photo of a night light made by yourself, posted on one of the Internet pages, is quite interesting, but the idea of creating your own work looks much more attractive.
The Internet can be used to determine the basic material that will be used in the work.
What materials are used in the work?
Sometimes, in search of suitable materials for work, people visit construction markets and stores, but quite often everything that is needed can be found at home.
In this regard, it is interesting to consider the available tools that many craftsmen like to use in their creativity. Most of these tools are always at hand.
You can make a night light with your own hands from scrap materials using thin wooden boards and a sheet of acrylic, plexiglass, plastic bottles and so on.
An example of making a night light using LED strip
To implement one interesting idea To create a night light you will need a small amount of boards, an acrylic sheet and an LED strip.
The process of making a night light with LEDs with your own hands is as follows:
Take 2 boards of identical parameters with a small thickness. The thickness should allow for easy cutting. The material is carefully sanded with sandpaper or a sanding machine to obtain a smooth surface.
A rectangle of the same size as the planks is cut out of an acrylic sheet.
On one of the boards a pattern is depicted or some inscription is applied.
A jigsaw or drill is used to cut out a pattern or inscription using the through method. The resulting holes will serve as areas through which the light flux from the night lamp will pass.
Each board and acrylic sheet is equipped with four corner holes for installing mounting bolts. A hole is drilled in one of the empty boards for a cord attached to the LED strip.
A wide groove is cut out on the acrylic sheet, exceeding the width of the LED strip. The strip is laid in bottom part workpieces and secured in the groove.
Finally, the night light is assembled by connecting the boards with bolts.
This lamp can be installed on a table or mounted on a wall.
Other craft options are no less interesting appearance and manufacturing technologies.
Some involve a complex manufacturing process, for example, a “flower” night light made in the shape of a rose, while others are simple and quick to complete, such as led garland, placed in a glass jar.
Photos of night lights with your own hands
Many people associate this idea with the New Year, because at this time there are a lot of light bulbs, lights and garlands around. To make such a night light you will need a minimum amount of materials. Just a beautiful glass jar and a garland.
You can also use additional materials to create decor, but a night light in a minimalist style is more relevant due to the trend of this style in fashion now. So, you need to put the garland in a jar and enjoy the beautiful sight. To make the lamp look more impressive, you can place several jars with lights nearby.
Night light with infinity effect
Such lamps can be found in the store, but we will create them with our own hands. For this you will need:
- Acrylic mirror,
- translucent glass panel,
- strip with LED inserts,
- aluminum strip,
- wooden plank.
Manufacturing plan:
- Make grooves in a block of wood for the mirror and glass panels using special tools.
- The aluminum strip must be folded in the shape of a rectangle and secured to the block using bolts between the cuts made earlier.
- Wrap the aluminum strip with LED strip using glue or wire.
- Insert the mirror and glass panel into the recesses.
Night light - cloud
This lamp is an excellent decor for a small child’s nursery. You just need to take a lamp with a round, oval lampshade and cover it with cotton wool or other fluffiness in the form of a large cloud. The cloud should hang in the air, so you first need to thread a thick thread through the inside of the structure.
LED night light
Such a night light can be made from any material, because diode light bulbs are completely safe (they do not heat up, unlike other light elements). This option is suitable for avid crafters and needlewomen. After all, there is room for your imagination to run wild. Anything, there would be a desire! LED night light Can be made wall-mounted or reverse wall-mounted.
An LED wall night light is made from a straight piece of dense material and the diode strip itself. The base material can be beer cardboard, thin not heavy wooden board and so on. You need to cut out any shape from this material (cats, flowers, butterflies...) and attach an LED strip to the back side. Ready design can be attached to the wall.
Night light creating stars on the ceiling
This idea of a night light has appeared everywhere: in films, on TV, and so on. This is not surprising. A night light that creates stars on your ceiling attracts people's attention and makes the room feel magical and cozy. Such a night light will not only create a cozy atmosphere in the room, but will also give pleasant, unforgettable emotions of magic and joy to the child. To make such a night light you will need:
- Small glass jar with lid,
- Thick kitchen foil,
- Felt pen, marker,
- Scissors and awl,
- Board or any other hard surface
Manufacturing sequence:
- Use a marker to transfer the stars onto the foil.
- Place the foil on a hard surface and make holes with an awl, needle,
- Now move the sheet of foil into the jar, pressing it tightly against the walls. You should get a jar with inner layer foil walls.
- Place a lantern, or maybe a garland, inside the jar, and close the jar with a lid. Turn the structure upside down.
Paper night light
This version of the product is simple to implement, but requires great care and perseverance. Paper is a pleasant material for needlework. You can make a beautiful night light out of it. To work you will need thick paper, a stationery knife or awl, and any object emitting light. You just need to create neat holes in the form of some kind of pattern and roll the paper into a cylinder, placing the “light” inside.
Having looked at all kinds of handmade night lights, we can conclude that making beautiful, practical room decor is a pleasant pastime for creative people.
Anyone can create their own night light if they wish. This may seem like a very labor-intensive process, but creating your own decorative element will bring a lot of benefits, subsequently aesthetic pleasure and comfort.
Create beautiful masterpieces of home lighting and delight your loved ones!
Night, darkness - not everyone likes this environment, which is why night lights were invented. Children are afraid to be left alone in dark rooms, and night lights have always helped to brighten up this atmosphere. If you make it unusual, children will go to bed with great desire.
There are many different handmade night lights, and today we will show several options.
Night light made of wooden sticks.
We will need:
Wooden sticks, you can choose the size as you wish;
PVA glue (or other wood glue);
Socket and light bulb;
The mount (base) for the cartridge can be made from corrugated paper;
1. We take our sticks and glue them into squares. We will need about 25-35 of these squares.
2. We cut out the base for the cartridge from cardboard. The size corresponds to the size of the stick squares.
3 . We make a hole for the cartridge.
4. Depending on the size of the cartridge, we glue together several squares and cardboard, which will serve as a stand for us on the table.
5. We begin to build our lamp by gluing all the squares one by one. We stack them on top of each other in any position.
6. We insert the lamp socket and our lamp is ready!
How to make a night light “Starry Sky”?
The starry sky is a mystery that has always attracted our attention and our gaze. Now, thanks to the night light, you have the opportunity to enjoy the starry sky without leaving home. From the material, you will only need things that every home has:
Sheet of foil;
- jar with lid;
- flashlight;
- awl;
- scissors.
1. Take a sheet of foil and carefully make holes with an awl. If we want to get a full-fledged night sky, then we can use a star map.
2
. We cut off the excess foil, leaving the dimensions suitable only for the jar, the height of the sheet is equal to the height of the jar.
3 . We twist the sheet and insert it into the jar.
4. We put a flashlight on the bottom, turn it on and close the lid.
Enjoy the starry sky!
How to make a beautiful night light for your bedroom?
In order to make such a wonderful and beautiful night light, we will need:
Jar (glass or plastic) with a lid;
- lace fabric;
- a small flashlight;
- scissors;
- sewing machine.
1. Using a centimeter, take measurements from the jar. We need to know the exact dimensions to sew the overlay fabric correctly.
